Five-step tarpaulin covering method



Five-step tarpaulin covering method We usually know that waterproof tarpaulins have many uses, but we don’t know that the covers of waterproof tarpaulins are also very particular. …

Five-step tarpaulin covering method

We usually know that waterproof tarpaulins have many uses, but we don’t know that the covers of waterproof tarpaulins are also very particular. Yes, using the correct tarpaulin covering method can extend the service life of the waterproof tarpaulin. The editor below will introduce to you the five-step tarpaulin covering method:


1.The front of the tarpaulin is covered longitudinally, and the waist rope is on the side of the platform.


2. Binding of corner ropes: Tighten the 2 corner ropes at each end of the tarpaulin to make the tent The corners of the fabric expand outward into a triangle shape. Flatten both sides of the cloth corners and then fold them toward the end wall of the truck. Wrap the corners tightly at both ends of the vehicle. Pass them through the pressure rope, portable hook or the inside of the handbrake rod, tighten them in an X shape, and tie them to the T-shaped irons at both ends of the vehicle.


3. Bundling of waist and side ropes: There is a T-shaped iron in the middle of the vehicle, and a waist and side rope in the middle of the tarpaulin. The side ropes are tied to the T-shaped iron in the middle of the vehicle. If there is no T-shaped iron in the middle of the vehicle, the waist and side ropes in the middle of the tarpaulin are tied to the T-shaped iron near the middle of the vehicle. Other waist and side ropes are sequentially tied to the corresponding T-shaped irons starting from both ends of the vehicle and moving toward the middle of the vehicle.


4. Bundling of end ropes: The 2 end ropes at each end of the tarpaulin should be tightened and threaded Pass the portable hook or handbrake rod and tie them vertically to the two T-shaped irons at the end of the vehicle.


5. Bundling of pressure ropes: The pressure ropes at each end of the tarpaulin should press the corners of the tarpaulin and pull it Tightly, make the tarpaulin stick to the end wall of the vehicle, and tie it to the T-shaped iron on the side of the vehicle.




,






, “


AADF3RSEGDTHIU


Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA

This article is from the Internet, does not represent 【https://www.clothing-manufacturers.net/】 position, reproduced please specify the source.https://www.clothing-manufacturers.net/archives/34809
 
TOP
Home
News
Product
Application
Search